Adding Users to the SCIEX OS Software Security Database

日付: 09/23/2019
カテゴリー: SCIEX OS

0 投票
   印刷する    記事を評価する:

For research use only. Not for use in diagnostic procedures.


To add users to a SCIEX OS software security database, an user with the role of administrator must log into the software and navigate to the User Management section in the Configuration mode. If this is the first time that other users are being added since the software was installed, then the user who installed the software will need to log in using the same Windows login that was used to originally install the SCIEX OS software.

To add a new user, click on the plus sign near the user name or group field.

Sciex OS add user

This will open up the dialog box where you can select Object Type, Location and Object Name.

Select user or group

SCIEX OS should be able to accept either Groups or Users, depending on how your IT has set up Windows permissions,. (This article demonstrates how to add individual users, but the Groups object is left available to search as well.)

object types

Select the option you wish to search for, and then click OK.

Now select the proper location. If the PC in question has been added to the domain, then domain users are typically used (as in this example). Click on the Locations Tab and navigate to the proper domain (domain names are deliberately hidden in the screen shot for privacy).


Select the domain for the user in question, and then type in the user name that is used to log in to Windows. Once the user name is entered, click on Check Names to verify the username was entered correctly.

Once the user is added, click OK and check the box to assign a role to the newly added user. Once a user is added, click Save.

To verify the new login is working successfully, have the newly added user log in to Windows and open SCIEX OS software. The software should launch with the permissions associated with that user.