What Software Is Supported for Analysis of Data from the Echo® MS System?

日付: 10/19/2020

0 投票
   印刷する    記事を評価する:

For research use only. Not for use in diagnostic procedures.


Once a well plate has completed running on the Echo MS System, if a quantitation method is specified in the batch, there will be a .csv file created for each well, as well as one file that contains all of the data from the well plate. The .csv files contain the sample name, well location, component name, peak area, peak height, and peak width. The .csv files can be imported into any data visualization software. The .wiff2 data may also be reviewed in SCIEX OS.