Specifications for the SCIEX Pre-Assembled Capillary Cartridge for CE-SDS Applications

日付: 05/03/2019
カテゴリー: Capillary Electrophoresis

0 投票
   印刷する    記事を評価する:

For research use only. Not for use in diagnostic procedures.


The SCIEX pre-assembled capillary cartridge (part number A55625) is being used more frequently due to its ease-of-use in implementing CE assays, especially CE-SDS. Below are the specifications for the cartridge:

1. Appearance: standard blue capillary cartridge (similar to older cartridges such as PN 144738)
2. Coolant tubing length: 12.8 cm
3. Pre-cut capillary length: 30.2 cm with a window burn 10.2 cm from one end. Effective length is 20 cm. 
4. Bare fused silica capillary inner diameter: 50 µm
5. UV aperture: 200 µm for fixed wavelength UV detector or photo diode array (PDA) detector