Adding Custom Columns In a Batch in Analyst® Software｜質量分析計・LC-MS/MSシステムのSCIEX

For research use only. Not for use in diagnostic procedures.

Answer

To add a custom column(s) to a batch in Analyst® software, follow these steps:

1. Open or build an acquisition batch in the Acquire mode.
2. Select Add Set and Add Samples.
3. Right click within batch table.
4. Select Add Custom Column.
5. Type in the column title and select the appropriate column type.
6. Click OK. 
7. The custom column will appear in the batch table showing on the Sample tab.