Cliquid Error Retrieving the COM class factory for component with CLSID｜質量分析計・LC-MS/MSシステムのSCIEX

For research use only. Not for use in diagnostic procedures.
Issue Description 

Cliquid will run samples successfully but will be unable to process them and will report Error: Retrieving the COM class factory for component with CLSID {36977493-A670-11Dc-8Dcc-00104BC5f89A}… at the bottom of the window

Resolution 

This error is caused by non-registration of Analyst.  Close down Cliquid software, Reboot the computer and open Analyst Software.  Follow the instructions in the Analyst registration window to get a registration code and enter it into the window.

RUO-MKT-18-3076-A