Creating a Hardware Profile in Simulation Mode in SCIEX OS Software


日付: 05/03/2022
カテゴリー: SCIEX OS

0 投票
   印刷する    記事を評価する:

For research use only. Not for use in diagnostic procedures.


Answer

To create a hardware profile in simulation mode in SCIEX OS software, follow these steps:

1. Select the Configuration tile.
2. Select the Devices menu and then select the Add button in the upper right hand corner.
3. Choose the device from the Type and Model drop-down menus.
4. Click Settings and select Simulate Device.
5. Choose the appropriate instrument model to simulate.
6. Click Test device and Save.
7. Select the device and click Activate.