Can the Existing Ion Source on the X500R QTOF System Be Converted to APCI?｜質量分析計・LC-MS/MSシステムのSCIEX
| 日付: | 02/16/2021 |
| カテゴリー: | Environmental Industrial , Food and Beverage |
For research use only. Not for use in diagnostic procedures.
Answer
The source on the X500R QTOF System can be used in atmospheric-pressure chemical ionization (APCI) mode, but a different probe with a twin electrode must be installed. In addition, a different APCI tuning solution must be used that is available for purchase from SCIEX (part number 5042915; see table below for ordering information).
The APCI probe (part number 5057681) is shipped when the instrument is shipped, so it should already be on-hand. But it is available for purchase separately if needed. (See below for a picture of the probe.)
| PN: 5042915 | APCI Negative Calibration Solution for the X500 System | Calibration solution for the X500 System. This solution is intended for use in APCI negative ion mode. |
Comment